FILTER COMPATIBILITY

Is Dermsee Filter compatible with your sink? Our water filter is designed to fit with 95% of UK commercial sinks. To ensure a fit, please see the faucet references below.

DERMSEE COMPATIBLE FAUCETS

Compatible faucet type 1
Compatible faucet type 2
Compatible faucet type 3
Compatible faucet type 4

NONCOMPATIBLE FAUCETS

Non-compatible faucet type 1
Non-compatible faucet type 2

How to Install the Dermsee Filter

Watch our quick tutorial video, and learn how to install the Dermsee Filter!

1

Use the included wrench.

Remove the aerator off the end of your faucet.

*You can use your hand or pliers if it's tight.

Step 1: Use the included wrench to remove aerator
Step 2: Connect the Dermsee Filter
2

Connect the Dermsee Filter.

Once you've removed the aerator, twist on the Dermsee filter clockwise.

*measure the size of the adapter first.

3

Connect the Dermsee Filter Adapter.

If your sink needs the adapter, attach the correct size. Some sinks may not need an adapter.

Step 3: Connect the Dermsee Filter Adapter
4

When using the adapter

If there is a leak-proof rubber ring above the faucet of the original faucet, you can replace a similar rubber to install. If not, please use the existing leak-proof rubber ring.

5

When connecting the Dermsee Filter

Ensure it is tightened by hand, just tight enough for no leakage.

6

Check for leaks

After connecting the Dermsee filter.

Step 6: Check for leaks after installation

DERMSEE FILTER REPLACEMENT METHOD

Step 1: Separate the bottom of the faucet
1

Separate the bottom of the faucet (Dermsee Filter). Remove the discolored filter

Step 2: Put in a new filter
2

Put in a new filter (gear facing up)

Step 3: Reconnect the head and bottom
3

Reconnect the head and bottom of the faucet. Do not apply excessive force when tightening.